Daily maintenance of 3D four-wheel aligner
Release time:
2023-09-26
The handling stability of a car refers to the fact that the vehicle can travel in the direction specified by the driver through the steering system without the driver feeling nervous or tired, and when encountering external disturbances, the vehicle can resist disturbances and maintain smooth driving.The handling stability of the vehicle not only affects the convenience of the vehicle, but also the main factor that determines the safety of the vehicle at high speed. In order for the vehicle to achieve good handling stability, the reasonable design of the suspension, chassis and steering system and the setting of related data have become important conditions. The main data that affect the suspension and steering system include the camber angle of the wheel kingpin, the rear camber angle of the kingpin, the front camber angle and the front beam angle, the rear camber angle and the rear beam angle. Once these data change, they will be reflected in the driving state of the vehicle, such as steering wheel shake, increased steering force, incorrect steering wheel position, vehicle deviation, tire wear, etc. In view of this situation, the necessary adjustments to the data are required to correct the handling stability of the vehicle.This operation is professionally called four-wheel positioning, including front wheel positioning and rear wheel positioning.
The handling stability of a car refers to the fact that the vehicle can travel in the direction specified by the driver through the steering system without the driver feeling nervous or tired, and when encountering external disturbances, the vehicle can resist disturbances and maintain smooth driving.The handling stability of the vehicle not only affects the convenience of the vehicle, but also the main factor that determines the safety of the vehicle at high speed. In order for the vehicle to achieve good handling stability, the reasonable design of the suspension, chassis and steering system and the setting of related data have become important conditions. The main data that affect the suspension and steering system include the camber angle of the wheel kingpin, the rear camber angle of the kingpin, the front camber angle and the front beam angle, the rear camber angle and the rear beam angle. Once these data change, they will be reflected in the driving state of the vehicle, such as steering wheel shake, increased steering force, incorrect steering wheel position, vehicle deviation, tire wear, etc. In view of this situation, the necessary adjustments to the data are required to correct the handling stability of the vehicle.This operation is professionally called four-wheel positioning, including front wheel positioning and rear wheel positioning.
Daily maintenance skills of 3D four-wheel aligner
1. Avoid use in direct sunlight and ensure the ambient temperature of the equipment (-10-35 degrees Celsius)
2. The equipment should be installed in a place where air circulates, and the back cover of the equipment should be at least 10CM from the ground.
3. During the operation of the system, do not move the chassis to avoid damaging the computer.
4. Please do not plug in or unplug any components on the system without cutting off the power to the system.
5. Please do not switch the power switch of the equipment frequently, otherwise it will easily damage the internal components.
6. Computer viruses should be avoided.
7. The equipment should be well grounded.
8. Four-wheel aligners are precision electronic instruments, and they should be kept away from conductive liquids such as water and oil. If the liquid enters the system, it is strictly forbidden to open the system. The liquid should be sucked dry before operation.
9. Do not store or use equipment in places where chemicals and dust are concentrated.
10. For accurate measurement, please ensure that the corner disc and side skateboard rotate and slide freely.
11. If the environmental hygiene is poor, please clean and maintain the equipment regularly.
12. Make sure that each camera lens is clean so as not to block the light and affect the signal reception.
RELATED INFORMATION
Boss Direct Line/Whatsapp
After Sale Service Line
Address
Building 32, Liandong U Valley, No. 1 Huahai Road,Zhifu District, Yantai City, Shandong Province, China
Supply Products
Copyright©Yantai Jingli Automobile Testing Equipment Co., Ltd. Power by 300.cn SEO Tags
